6 aa battery holder 9v


Nowadays, there are so many products of 6 aa battery holder 9v in the market and you are wondering to choose a best one.You have searched for 6 aa battery holder 9v in many merchants, compared about products prices & reviews before deciding to buy them.

You are in RIGHT PLACE.

Here are some of best sellings 6 aa battery holder 9v which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.

Top Products Brand Name & Model Check Price
6 AA Battery Holder With 2.1mm x 5.5mm Connector 9V Output 2 Pack by Corpco by Corpcorate Computer Check Price
Philmore Battery Holder for (6) AA with Standard Snap Connector : BH363 (1) by Philmore / LKG Industries, Inc. Check Price
Hilitchi 2Set 6 x AA Thicken Battery Holder and T Type Wired Battery Clip Standard Snap Connector by Hilitchi Check Price
9V AA Battery Pack with Leads, 6 x 1.5v AA Battery Case Holder, FolioGadgets Battery Storage Box with ON/OFF Switch [4-Pack] by FolioGadgets Check Price
AA Battery Holder with Switch, Besmelody 6 x 1.5V (9V) AA Battery Storage Box Case with Cover and 6" Bare Wire Leads by Besmelody Check Price
LAMPVPATH (Pack of 3) 6 AA Battery Holder, 9v AA Battery Holder, 6 AA Battery Holder With Leads by LampVPath Check Price
4 x 1.5V (6V) AA Battery Holder 9V I Type Snap Connector Plastic Housing (3+3) Pcs by XiangLv Check Price
LAMPVPATH 3 Pcs 4 x 1.5V (6V) AA Battery Holder with 3 Pcs 9V I Type Snap Connector Plastic Housing by LampVPath Check Price

1. 6 aa battery holder 9v Review – 6 AA Battery Holder With 2.1mm x 5.5mm Connector 9V Output 2 Pack by Corpco

6 AA Battery Holder With 2.1mm x 5.5mm Connector 9V Output 2 Pack by Corpco

6 aa battery holder 9v REVIEW – IMAGE SOURCE AMAZON

  • Holds 6 x 1.5V AA Batteries, Provides 9V Output When Used Alkaline Batteries, 7.2V When Used With Rechargeable AA
  • Standard 2.1mm x 5.5mm Power Plug Fits Arduino Boards And Most Other Small Elecrtronics
  • Holder Made Of ABS Plastic With Nickel plated springs to hold the batteries tight in place

Great 6 AA battery holder for your Arduino project! Provides 9V output when used Alkaline batteries, 7.2V when used with rechargeable AA. These AA battery holders feature a 2.1mm x 5.5mm power plug on a 4 inch cable. The case is made from ABS plastic with nickel plated springs to hold your AA batteries in place. Each battery holder measures 3.6′ x 2.3′ x 0.59′( L * W * H ). AA batteries in these holders will last much longer than a standard 9V battery will when powering up electronic projects. AA batteries not included

Number of Customer Reviews: 10 customer reviews
Average Review Rating: 4.4 out of 5 stars

2. 6 aa battery holder 9v Review – Philmore Battery Holder for (6) AA with Standard Snap Connector : BH363 (1)

Philmore Battery Holder for (6) AA with Standard Snap Connector : BH363 (1)

6 aa battery holder 9v REVIEW – IMAGE SOURCE AMAZON

    This fits your .
  • Make sure this fitsby entering your model number.
  • Save when you buy the 2-Pack!

Package Quantity:1

Battery holder for (6) AA batteries

Number of Customer Reviews: 81 customer reviews
Average Review Rating: 4.4 out of 5 stars

3. 6 aa battery holder 9v Review – Hilitchi 2Set 6 x AA Thicken Battery Holder and T Type Wired Battery Clip Standard Snap Connector

Hilitchi 2Set 6 x AA Thicken Battery Holder and T Type Wired Battery Clip Standard Snap Connector

6 aa battery holder 9v REVIEW – IMAGE SOURCE AMAZON

  • High quality Battery Holder 6 X AA Cells With Standard Snap
  • Package Quantity: Battery Holder x 2pcs, T Type Wired Connector x 2pcs
  • T Type Wired Connector Length: 15cm/5.9”
  • 4 X AA Battery Holder: http://www.amazon.com/dp/B01381A020
  • 8 X AA Battery Holder: http://www.amazon.com/dp/B011WOKCPA

High Quality Battery Holder 4 X AA Cells With Standard Snap
Package Quantity: Battery Holder x 2pcs, T Type Wired Connector x 2pcs
T Type Wired Connector Length: 15cm/5.9”
4 X AA Battery Holder:
http://www.amazon.com/dp/B01381A020
8 X AA Battery Holder:
http://www.amazon.com/dp/B011WOKCPA

Number of Customer Reviews: 36 customer reviews
Average Review Rating: 4.2 out of 5 stars

4. 6 aa battery holder 9v Review – 9V AA Battery Pack with Leads, 6 x 1.5v AA Battery Case Holder, FolioGadgets Battery Storage Box with ON/OFF Switch [4-Pack]

9V AA Battery Pack with Leads, 6 x 1.5v AA Battery Case Holder, FolioGadgets Battery Storage Box with ON/OFF Switch [4-Pack]

6 aa battery holder 9v REVIEW – IMAGE SOURCE AMAZON

  • 6x 1.5V AA battery holder with cover and ON/OFF switch
    Cable Length: 15cm
  • ABS material high quality battery holder case comes with a case cover for keeping the battery in place.
  • Keeping your standard or rechargable batteries together and safe to form 9v power supply
  • Can be used as battery power supply for arduino micro-controller, led projects, toys and so on
  • Package Included: 4x 6 slots AA Battery Pack Case Holder
    1 year warranty and our kindly customer service, welcome to contact us.

This battery box holder comes with 6 inch bare wire leads, fits for 6 x AA 1.5v batteries. Great for standard and rechargeable batteries. Bare wire is great for easy connection.
Battery Type: 6 slots 1.5V AA battery pack
Switch Function: AA battery holder with ON/OFF switch
Wire Leads: 6 inch bare wire
Battery Holder Wire Length: 6 ‘/15cm
Wire Diameter: 14 A.W.G.
Battery Case Dimensions: 4.2 ‘ x 3 ‘ x 0.75’/10.7cm x 7.7cm x 1.9cm(L*W*H)
Battery Box Weight: 2.6oz/75g
Material: Plastic ABS

Please Note:
1.Batteries are not included

2.Do NOT connect the positive and nagative leads directly

3.Do NOT use this box to charge batteries.

5. 6 aa battery holder 9v Review – AA Battery Holder with Switch, Besmelody 6 x 1.5V (9V) AA Battery Storage Box Case with Cover and 6" Bare Wire Leads

AA Battery Holder with Switch, Besmelody 6 x 1.5V (9V) AA Battery Storage Box Case with Cover and 6" Bare Wire Leads

6 aa battery holder 9v REVIEW – IMAGE SOURCE AMAZON

    This fits your .
  • Make sure this fitsby entering your model number.
  • AA battery holder with cover and on / off switch is designed for 6-slot 1.5V AA standard or rechargeable batteries
  • 6 AA Battery Holder Body Size: 4.2 x 3 x 0.75 inch / 10.7 x 7.7 x 1.9cm (L*W*H)
    Weight: 2.6oz/75g
  • Battery holder is made of ABS plastic with nickel plated springs, holding the batteries tight in place
  • Great for Arduino boards micro-controllers, led projects, toys, also replaces broken battery holders for many electronic devices
  • Package Contents: 2x 6 AA Battery Holder
    Besmelody 18-month warranty and friendly customer service.

Great for Arduino boards micro-controllers, led projects, toys, also can replace broken battery holders for many electronic devices.
Battery holder is made of ABS plastic with nickel plated springs, holding the batteries tight in place.
Designed with a cover, on / off switch and 6 inch bare wire leads.

Note 1:
Please do not use this battery pack for high currect output project.
Note 2:
Battery is not included.
Note 3:
Please do not use this battery box to charge batteries.

Package Contents:
2x 6 AA Battery Holder
Besmelody 18-month warranty and friendly customer service.

6. 6 aa battery holder 9v Review – LAMPVPATH (Pack of 3) 6 AA Battery Holder, 9v AA Battery Holder, 6 AA Battery Holder With Leads

LAMPVPATH (Pack of 3) 6 AA Battery Holder, 9v AA Battery Holder, 6 AA Battery Holder With Leads

6 aa battery holder 9v REVIEW – IMAGE SOURCE AMAZON

    This fits your .
  • Make sure this fitsby entering your model number.
  • Battery Holder Type: 6 x aa battery holder, 9 volt battery holder, It’s the handy aa battery holder for small diy project, like 6 aa battery holder arduino
  • Voltage Output of 6 Cell AA Battery Holder : 9V, 6 x 1.5V aa battery= 9v battery holder
  • Dimensions of 6 AA Battery Holder: (L*W*H)/2.24′ x 1.77′ x1.10’/5.69cm x 4.50cm x 2.80cm
  • Wire Leads: 6 aa battery holder with leads, tinned wire end
    Wire Length: 5.9’/15cm
    Cable Diameter(count in the PVC isolation around the wire): 0.059’/1.5mm
    Cable Color: red and black
  • Weight of One 9v AA Battery Holder: 0.476oz/13.5g
    Package Contents: 3Pcs battery holder for 6 aa

›See more product details

Brand Name: LAMPVPATH

Specification:
<1>Battery Holder Type: 6 x aa battery holder, 9 volt battery holder, It’s the handy aa battery holder for small diy project, like 6 aa battery holder arduino
<2>Voltage Output of 6 Cell AA Battery Holder : 9V, 6 x 1.5V aa battery= 9v battery holder
<3>Leads of 6AA Battery Holder: 6 aa battery holder with leads, tinned wire end
<4>Wire Length of 6 AA Battery Holder with Wires: 5.7’/14.5cm
<5>Wire Diameter of 6 Double a Battery Pack(count in the PVC isolation around the wire): 0.059’/1.5mm
<6>Color of Cable of 6 AA Battery Holder: red and black
<7>Dimensions of 9v AA Battery Holder:(L*W*H)/2.24′ x 1.77′ x1.10’/5.69cm x 4.50cm x 2.80cm
<8>Weight of One 6 AA Battery Holder 9v: 0.476oz/13.5g
<9>Box Color of AA Battery Holder 9v: black
<10>Material of 9v Battery Holder: Plastic ABS
<11>If This ‘Battery Holder for 6 AA’ has ON/OFF Switch: no
<12>If This ‘Battery Holder for 6 AA’ has Cover: no

Package Contents:
3x 6 aa battery holder

Warranty:
Life Time Warranty: any quality issues, please feel free to contact the SELLER for Refund or Replacement.

Number of Customer Reviews: 1 customer review
Average Review Rating: 5.0 out of 5 stars

7. 6 aa battery holder 9v Review – 4 x 1.5V (6V) AA Battery Holder 9V I Type Snap Connector Plastic Housing (3+3) Pcs

4 x 1.5V (6V) AA Battery Holder 9V I Type Snap Connector Plastic Housing (3+3) Pcs

6 aa battery holder 9v REVIEW – IMAGE SOURCE AMAZON

  • Material:ABS plastic and metal
  • Color and Weight:Black and 15g
  • Battery Type :4 x 1.5V (6V) AA
  • Battery Holder Size :6 x 6.3 x 1.6cm/2.36′ x2.48′ x0.63 ‘(L*W*H)
  • Snap Connector Size and Wire Lengh:0.94′ x 0.51′ x 0.39’and 5.5′

Size:4AA-3PC-3tao4jie5hao

Color:Black
Weight:15g
Material:ABS plastic and metal
Package:4 x 1.5V (6V) AA Battery Holder with 9V I Type Snap Connector(3+3)Pcs

8. 6 aa battery holder 9v Review – LAMPVPATH 3 Pcs 4 x 1.5V (6V) AA Battery Holder with 3 Pcs 9V I Type Snap Connector Plastic Housing

LAMPVPATH 3 Pcs 4 x 1.5V (6V) AA Battery Holder with 3 Pcs 9V I Type Snap Connector Plastic Housing

6 aa battery holder 9v REVIEW – IMAGE SOURCE AMAZON

  • Battery Type: 4 x 1.5V (6V) AA Batteries
  • Body Size : 6 x 6.3 x 1.6cm/2.36′ x2.48′ x0.63 ‘(L*W*H)
  • 9V I Type Snap Connector Size( Each ) :2.4 x 1.3 x 1cm/0.94′ x 0.51′ x 0.39′ with wire length 14cm/5.5′
  • Material:plastic ABS+Metal, Color : Black,Weight: 15g
  • Package Content : (3 Pcs) 4-slots AA Battery Case Holders with (3 Pcs) 9V I Type Snap Connector Plastic

Size:4AA-3PC

Brand Name: LAMPVPATH

Specification:
<1>Battery Type: 4 x 1.5V (6V) AA Batteries
<2>Color: Black
<3>Body Size : 6 x 6.3 x 1.6cm/2.36′ x2.48′ x0.63 ‘(L*W*H)

<4>9V Snap Connector Size( Each ) :2.4 x 1.3 x 1cm/0.94′ x 0.51′ x 0.39′ with wire length 14cm/5.5′
<5>Construction:One layer can load 4 AA batteries
<6>Material:plastic ABS
<7>Weight: 15g(one 4aa battery holder and one 9V battery connector)

Package included:
(3 Pcs) 4-slots AA Battery Case Holders with (3 Pcs) 9V I Type Snap Connector Plastic

Number of Customer Reviews: 46 customer reviews
Average Review Rating: 4.5 out of 5 stars

Related to items you viewed

Leave a Reply

Your email address will not be published. Required fields are marked *