Nowadays, there are so many products of temperature controller for freezer in the market and you are wondering to choose a best one.You have searched for temperature controller for freezer in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings temperature controller for freezer which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
1. temperature controller for freezer Review – Johnson Controls A19AAT-2C Freezer Temperature Controller (D132)
temperature controller for freezer REVIEW – IMAGE SOURCE AMAZON
- Make sure this fitsby entering your model number.
- Great for turning a chest freezer into a keg refrigerator
- Easy to set up and use
- Plug unit into wall and then run the sensor into your freezer
- Very economical
Use this handy controller to regulate the temperature in your freezer between 20 – 80F . Great for turning a chest freezer into a keg refrigerator. Strictly a mechanical thermostat for cooling only, it is simple to use and economical. It operates with a gas filled probe on a 6-foot capillary tube. When the gas contracts or expands in the probe, it triggers a mechanical device inside the control which turns the power on or off. There is no probe temperature readout on the dial, so keeping a thermometer inside the refrigerator is highly recommended to keep track of the actual temperature. On most refrigerators, the controller will allow a usable range of 37 to 80 F, while on freezers, the controller will be able to reach its full 20 to 80 F range. Features: Made of stainless steel. Adjustable with the turn of a knob. No drilling necessary. Plug unit into wall and then run the sensor into your freezer. Male and female plug in one. Specs: Temperature dimensions: 4 3/8′ H x 2 1/8′ W x 1 1/2′ D. Cord dimensions: 6′. Remote sensor bulb: 5 1/2’W. Remote sensor bulb capillary tube: 6′. Temperature range: 20 – 80F. Voltage: 120 VAC.
2. temperature controller for freezer Review – Beer Cooler Refrigerator Freezer conversion Temperature Controller Thermostat
temperature controller for freezer REVIEW – IMAGE SOURCE AMAZON
- Make sure this fitsby entering your model number.
- Beer Cooler Refrigerator Freezer conversion Temperature Controller Thermostat
TIP #1: Some folks try to sell regular refrigerator thermostats as a freezer/fridge conversion kit… Don’t use them for your beer cooler, the operating range goes far below the freezing point (0ºF)… Too many brewers lost a whole batch of excellent, but frozen beer! Our conversion thermostat is custom made for your brewing project, ranging from 30ºF to 50ºF. TIP #2: Programmable digital thermostats. Whenever a short power failure occurs like in bad weather or other short interrupts, the thermostat stops working and need to be manually reset. You will find out when you open the cooler door, 90 degrees inside… Converts any freezer into a super efficient refrigerator or kegerator. Commercial grade, calibrated, adjustable for your special preference. Save energy – operates at about $20 Dollars of electricity per year. Comes complete with customized installation kit (no need to buy expensive tools) Easy to install – just connect the 2 wires plus ground (don’t need to call an electrician…). Installation instruction with pictures included.
3. temperature controller for freezer Review – Inkbird ITC-308 Max.1200W Heater, Cool Device Temperature Controller, Carboy, Homebrew, Fermenter, Greenhouse Terrarium Temp. Control
temperature controller for freezer REVIEW – IMAGE SOURCE AMAZON
- Make sure this fitsby entering your model number.
- [Convenient Design] Plug and play design, easy to use. Support °C/°F display.
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
- [Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
- [Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Specification:
Temperature Control Range: -50~99°C / -58~210°F
Temperature Resolution: 0.1°C / 0.1°F Temperature Accuracy: ±1°C (-50~70°C) / ±1°F (-50~160°F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5×2.7×1.3inch)
Socket Dimension: 85x42x24mm (3.3×1.7x1inch)
Ambient Temperature: -30~75°C / -22~167°F
Storage Temperature: -20~60°C / -4~140°F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
4. temperature controller for freezer Review – Inkbird Pre-Wired Dual Stage Digital Temperature Controller Outlet Thermostat 110V, 1100W Heating and Cooling Multi-purpose Controllers for Aquaria, Reptile Keeping, and Brewing Fermentation Kegerator
temperature controller for freezer REVIEW – IMAGE SOURCE AMAZON
- Make sure this fitsby entering your model number.
- Simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
- Be able to connect with refrigeration and heating equipment at the same time.
- Easily calibrated.
- Can display in Centigrade or Fahrenheit.
- Whether you need temperature control for fermentation, greenhouse, kombucha control or to set up your temperature project system, the ITC-308 temperature controller is a great choice.
Features:
Temperature Control Range : -50~99 °C / -58~210 ° F
Temperature Resolution: 0.1 ° C / 0.1° F Temperature
Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5×2.7×1.3inch)
Socket: 85x42x24mm(3.3×1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
5. temperature controller for freezer Review – Jaybva Digital Temperature Controller for Freezer STC-1000 PID Thermostat Meter with NTC Sensor Temperature Probe Cooling Heating 2 Relays Output AC 110V
temperature controller for freezer REVIEW – IMAGE SOURCE AMAZON
Mounting dimension:
Front Panel Size: 75(L)*34.5(W)mm Mounting Size: 71(L)*29(W)mm
Product Size:75(L)*34.5(W)*85(D)mm Sensor Length: 2m (include the probe)
Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -50 °C to 99 °C
Resolution: 0.1 °C
Accuracy: ±1 °C
Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC)
Ambient Temperature: 0 °C to 60 °C
Storage Temperature: -30 °C to 75 °C
Relative Humidity: 20-85% (No Condensate)
Package Content:
1x STC-1000 Temperature controller
1x NTC Sensor
1x User Manual
6. temperature controller for freezer Review – Inkbird 10A 110V Digital Thermostat with Heat and Cool Relays ITC-308 Home Brewing
temperature controller for freezer REVIEW – IMAGE SOURCE AMAZON
- Make sure this fitsby entering your model number.
- [Convenient Design] Plug and play, easy to use.
- [Reading Mode] Support reading with Centigrade or Fahrenheit unit.
- [Safe] Maximum output load: 1100W(110V).
- [Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
- [Dual Display Window] Be able to display measured temperature and set temperature at the same time.
7. temperature controller for freezer Review – MXBAOHENG SF-102 Electronic Temperature Controller Digital Display Freezer Thermostat 110V
temperature controller for freezer REVIEW – IMAGE SOURCE AMAZON
- Make sure this fitsby entering your model number.
- Temperature display/temperature control
- Manual, automatic shutdown of defrosting
- Time and temperature stop the defrosting
- Lighting control/start-up delay, Key operation restore factory
- Particularly suitable for medium and high temperature air-cooled cabinets
The product usually takes 7–13 business days to arrive to your hand after your order is confirmed
Model: digital thermostat (frozen) SF-102
Measuring temperature display range: -45 ~ 45°C
Measurement accuracy: ±1 °C
Overall dimensions (mm): 77mm (length) x 35mm (width) x 60mm (D)
E1 Lowest temperature: -45°C ~ control the temperature,the factory value of -35°C
E2 Highest temperature: control temperature~45 °C, the factory value of 20 °C
E3 Temperature return difference: 1 ~ 10 °C, the factory value of 4 °C
E4 Delay start-up time from 0 ~ 10minutes,the factory value of 2 minutes
E5 Warehouse temperature probe calibration: -5 ~ 5 °C, the factory value of 0 °C
E6 Defrost probe calibration:-5 ~ 5 °C, the factory value of 0 °C
F1 Defrost time: 1~ 60 minutes, the factory value of 20 minutes
F2 Defrost interval: 1 ~24 hours, the factory value of 6 hours
F3 Defrost termination temperature: 0 ~20 °C the factory value of 8 °C
F4 Defrost temperature display: 0 = normal warehouse temperature display, 1 = defrost start temperature display
8. temperature controller for freezer Review – Inkbird ITC-1000 Dual Stage Digital Temperature Controller Fahrenheit & Celsius Thermostat with Sensor for 3D Printer,Freezer,Fridge,Hatching ect (110 Volt)
temperature controller for freezer REVIEW – IMAGE SOURCE AMAZON
- Make sure this fitsby entering your model number.
- It does indeed read in deg F.
- Can control both heating and cooling output
- Has an alarm to indicate sensor failure or high temperature
- Highly accurate and reliable temperature controller
- Be more user friendly than the STC-1000
Fahrenheit and Celsius Display Can Be Choose
Temperature Calibrating, Refrigerating control output delay protection
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Technical Parameter:
Output: 2 Relays
Temperature Measuring Range: -50~210 oF / -50 oC-99 oC
Resolution: 0.1 oF / 0.1 oC
Accuracy: ±1 oF(-50 oF -160 oF)/ ±1 oC(-50 oC -70 oC) Power Supply: 110VAC 50Hz/60Hz
Power Consumption: 3W
Sensor: NTC Sensor
Relay Contact Capacity: Cooling (10A/250VAC)/ Heating (10A/250VAC)
Ambient Temperature: 0 oC-60 oC
Storage Temperature: -30 oC-75 oC
Relative Humidity: 20-85% (No Condensate)
Package Content:
1x Temperature controller ITC 1000 110V
1x 7.87′ SENSOR
1x Muanal